TEO - wireless set with universal switch and dimmer
TEO set is a RF controller with a proximity sensor fitted with dimmer function. It works in two separate modes: DOOR and MOVE and has a range of 10 meters. Switches available in black and white colour.
TEO set consists of:
- RF controller max 8A (96W/12V DC and 192W/24V DC);
- proximity switch with dimmer;
- battery charging cable (only available in the set);
- mounting components of the switch.
TEO set is a universal solution. It is used for wireless control of 12 or 24V DC LED lighting in any furniture.
TEO operates in two working modes:
1). DOOR - this mode is dedicated to both hinged and sliding doors and fronts. The main advantage of the switch is that in a hinged door system, one switch applied in the middle can handle two leaves.
Operating range of the TEO switch in this mode is:
- up to 1 cm for black/dark furniture fronts;
- up to 3.5 - 4 cm for white/light furniture fronts.
2). MOVE - switch operates with an additional lighting dimming function (approaching/moving a hand in the switch area for more than 1 sec). The switch can be used in shelves, open recesses, cabinets, etc.
TEO switch should be installed on the surface with use of dedicated components.
It is a wireless device so it requires charging of the built-in battery via the micro USB port. The charger is included in the set. The battery will last for approximately 3 months of operating in standard conditions.
TEO set is pre-programmed and ready to use out of the box! It works up to 10 metres basing on radio sygnal.
It is possible to expand the set by purchasing additional components such as TEO switches. Up to 8 TEO switches can be assigned to single TEO RF controller.
- convenient wireless control of LED lighting by radio up to 10 m;
- management of LED lighting with 12 or 24V DC and max power of 8A (96W/12V DC and 192W/24V DC);
- two independent working modes: DOOR and MOVE;
- functional switch for sliding and swinging doors and fronts (DOOR mode);
- possibility of dimming/brightening the light in the MOVE mode;
- no need to change batteries - it's rechargeable,
- simple surface mounting of the switch with use of dedicated components.
- Power supply
- 12V DC/24V DC
- max 8A
- Protection ingress IP
- White or black
- Controlling the lighting effects of luminaires and LED strips
- 10 m