TEO switch is a proximity sensor with dimmer function. It works in two separate modes: DOOR and MOVE and is available in two colours: black and white.
TEO switch is a proximity sensor with dimming function. Available in black and white colour. TEO switch should be installed on the surface with use of dedicated components.
With use of TEO switch you can turn on/turn off and brighten/dim LED lighting of 12V and 24V DC voltage and max 8A (96W/12V DC and 192W/24V DC). Sensor does not require any wires and is fitted with a built in, rechargeable battery (5V DC, mico USB port). Fully charged battery should last for approximately 3 months of woring in standard conditions.
TEO switch operates in two working modes:
1). DOOR mode - this mode is dedicated to both hinged and sliding doors and fronts. The main advantage of the switch is that in a hinged door system, one switch applied in the middle can handle two leaves.
Operating range of the TEO switch in this mode is:
- up to 1 cm for black/dark furniture fronts;
- up to 3.5 - 4 cm for white/light furniture fronts.
2). MOVE mode - switch operates with an additional lighting dimming function (approaching/moving a hand in the switch area for more than 1 sec). The switch can be used in shelves, open recesses, cabinets, etc.
TEO switch advantages:
- convenient wireless control of LED lighting by radio up to 10 m;
- dedicated for LED lighting with 12 or 24V DC and max power of 8A (96W/12V DC and 192W/24V DC);
- two independent working modes: DOOR and MOVE;
- functional switch for sliding and swinging doors and fronts (DOOR mode);
- possibility of dimming/brightening the light in the MOVE mode;
- no need to change batteries - it's rechargeable via micro USB port,
- simple surface installation with use of dedicated components.
You might also like
