The IR K1 proximity switch provides non-contact on/off lighting with a total power of 500W.
The switch turns on and off the lighting by recording movement in the area of 35 mm and an angle of 90 degrees.
Movement around the sensor (up to 35 mm) turns on the lighting, and re-movement around the sensor turns off the lighting.
Mounting description: Drill a hole with a diameter of 12 mm at the sensor head mounting location. Gently insert the sensor head into the mounting hole, then connect the sensor plug to the switch.
Input voltage: 230V ~ 50/60 Hz
Max output load: 500W
Output cable with sensor: 2m
Operating range: approx. 35 mm
We also recommend LED luminaires with motion sensor and other accessories from our offer.
