RGB LED controller with 4-zone RF remote control
RGB LED controller with 4-zone RF remote control
RGB LED controller with 4-zone RF remote control
RGB LED controller with 4-zone RF remote control
RGB LED controller with 4-zone RF remote control
RGB LED controller with 4-zone RF remote control

RGB LED controller with 4-zone RF remote control

ZSTER-RGB-RF-01

Wireless set: RF RGB controller with 4-zone, multifunctional remote control enabling changing RGB LED lighting colors by radio.

Ask for an offer
close

Ask for an offer





Refresh the code


 
 

It allows you to control up to four RGB zones in a range of 30 m. The maximum light intensity is 10A.

Thanks to this solution, we can individually control LED lighting, e.g. tapes, clips or SQUARE luminaires located in separate rooms, which gives great convenience in use.

By moving your finger in a circle in the colors of the rainbow, you can get any colors of light.

The controller also has additional functions, e.g. the ability to program its own sequence of color changes separately for each receiver, turn on / off individual zones, change program speeds, change the brightness of LED RGB products, as well as flashing.

The 2,4G wireless high-frequency controller is used to control RGB LED lighting. It is characterized by low energy consumption, long range and high resistance to interference. The remote control looks fashionable and elegant, has simple and practical functions for changing the color and light intensity.

Remote control power supply: AAA batteries - 2 pcs (battery not included).

Connecting (programming) a new zone to the remote control:
1. Select the zone to which you want to program (connect) lighting (from 1 to 4).
2. Turn off the power for the lighting you want to program with the main switch or pull the plug out of the socket.
3. Turn on the lighting and press the "Turn on zone" button for 3 seconds responsible for the zone to which you want to connect the lighting.
4. If the attachment operation is successful, the lighting will flash 3 times and turn off.

Disconnecting the lighting from the assigned zone:
1. Check with the remote control which zone the lighting is currently connected to.
2. Turn off the power to the lighting of the area you want to disconnect with the main switch or pull the plug out of the socket.
3. Turn on the power and press within 3 seconds quickly press the "Area on" button 5 times - of the selected zone.
4. When the disconnection operation is completed, the lighting will flash 6 times and turn off.

Grouping many zones with lighting
The remote control allows you to connect multiple zones with lighting to a given zone in the remote control, thanks to which you are flexible and you can create various combinations.

Instruction

             

 

Power supply
12V DC/24V DC
Power
120W/240W
Size (mm)
85x45x22
Material
Plastic
Color
White
Application
Controlling the lighting effects of luminaires and LED strips

You might also like

16 other products in the same category: